Team 226 Members

Benjamin Doty

Ben's Bike with Matte Clear

Got the pipe on saturday, thank you very much, and it's beautiful! I really appreciate all the extra details like:

• the added/strengthened spot on the pipe at the mounting bracket
• The silencer is to die for.... The laser etching looks bitchen
• the attachment of the silencer to the main exhuats and the support all look awesome
• the o-ring gasket at the header, super nice
• the instructions were great, didnt need them, but they were great nonetheless
• the added lube and hex wrench were excellent.

All in all an excellent package and well worth the price.

I installed it yesterday after doing a fairly large rebuild. Started up 3rd kick, sounds awesome! (I dig how it points slightly away from the bike. My JL goes straight back.) It ran really well but I have a fuel leak at the carb and my jetting is super rich, so hopefully tonight or tomorrow I can get those two things dialed in and I will be good to go.

For the record my set-up is as follows:

• Stock gearing
• Stock crank
• 4 plate clutch with 3 molassi and 4 stock springs
• Hot Rod Scooters (HRS) lightened flywheel
• HRS Super Sport cylinder work
• 3rd over Polini piston
• HRS Vortex carb, 55/160, 160/BE3/135
• and of course Hot Wing 2!!

---

viewing hint

Click the image to increase the size. This site uses Lightbox so you can click the first image and then go through a slide show by placing your mouse on the right-hand side of the picture and clicking “NEXT”.